Columbia Basin Washington Stories

Most issues with alarms that are malfunctioning require an electrician to repair, therefore we don’t offer alarm troubleshooting.  

There are some things you can check before calling an electrician:

• Remove the lid from the riser and check the actual level in the tank.
• If your level is too high, you can try running the pump on manual to see if it comes on and pumps down the level.  If it does, most likely you have a float or panel issue and you need to call an electrician.
• If the pump doesn’t work then you may have a bad pump or connection. Again, call an electrician.
• On a new system, often times a low-level alarm will sound until enough water is used to fill the pump chamber. If this is the case, use a hose and fill the pump chamber until the alarm goes off. Don’t turn off the system! This can turn out very bad!

We do, on occasion, remove orchards of large size. For residential tree removal, please call a tree company like Superior Tree.

For this service we would refer you to a landscaping company.